External Audit(By Client)

Assalammualaikum & salam sejahtera to all inspector outside their.Hari ini aku nak cerita sedikit pengalaman aku masa di audit oleh salah satu client.Aku cerita sedikit pasal project ini.project ada banyak phase.aku buat phase 2 dimana company tempat aku bekerja ini dikehendaki membina beberapa buah dandang x berapi(pressure vessel) dan sebuah tangki air(water storage tank).Audit ini aku involve masa bulan puasa lepas.ada la dalam 7 hingga 8 orang manusia yang datang.aku pun xkenal sangat..almaklum la aku pun fresh lagi dalam bidang ni..Audit ni ada 2 kategory yang aku tau la..yang pertama ada external audit(ASME,ISO,API,Cilent & etc) & yang kedua internal audit(Internal auditor).Audit yang aku involve semasa bulan puasa adalah external audit dimana manusia2 yang datang mengaudit company aku bekerja yang berkaitan dengan QA/QC..antara soalan soalan yang ditanya berkaitan dengan welding consumables handling,painting,material receiving dll..Audit ni company tempat aku bekerja dapat 2-3 NCR(non-Conformance Report.Antara kandungan NCR itu yang aku tau la..(NCR sampai kat QC Manager aku)pasal welding consumables not in proper storage.Bagi aku sepatutnya xkena NCR sebab sume consumables yang sampai masih dalam seal container,dalam kotak and wrap dengan plastic wrap(seperti gmbr dibawah).Korang rasa patut x kena NCR??

Ada satu lagi soalan daripada salah seorang auditor yang datang..pasal blasting media..mungkin auditor ini painting inspector..dia bagitau blasting media yang dibawah ini bukan garnet..Dia bagitau dia xpernah tengok garnet warna ini(seperti gambar dibawah.dia biasa tengok garnet warna hitam..may be otai2 painting kat luar boleh terangkan lebih lanjut,kalau sudi la untuk berkongsi maklumat..

aku rasa pe yang painting contractor guna memang garnet(type 20 30)..gambar yang aku upload aku compare dengan ape yang painting contractor aku guna lebih kurang sama je warnanya..aku xpasti sama ada issue ni kena NCR atau x..itu sahaja buat hari ini..hhehe..sekian terima kasih..Assalammualaikum..

Selamat Hari Raya Merdeka 2011

Assalammualaikum w.b.t. kepada semua umat islam dan selamat sejahtera kepada yang bukan beragama islam..Hari ini pastinyanya hari yang istimewa bagi umat2 islam diseluruh dunia termasuk negara kita Malaysia yang mana Aidilfitri menjelang tiba setelah sebulan berpuasa.bulan puasa/ramadhan aku xupdate blog aku dengan info2 yang terbaru,maklum la penat berpuasa la...hehheheh..alasan..=)Selepas hari raya insyAllah (if God will its) aku akan update dengan info2 yang baru terutama kepada freshie/junior inspector macam aku berkenaan audit.Sebelum aku mengundur diri aku menyusun sepuluh jari memohon maaf dari hujung rambut sehingga hujung kaki jika ada salah dan silap yang mengguris hati harap dimaafkan dengan ikhlas hati..hOhOhOhO..macam S.samad Said la plak..=)Kepada Semua Inspector/Umat Islam Selamat Hari Raya Aidilfitri Maaf Zahir Dan Batin!!!!!

p/s : Kepada inspector2 terutama freshie/junior yang baru menceburi @ terjerumus dalam bidang inspection yang xdapat pulang ke kampung halaman jangan menangis jika berada di perantauan mahupun di atas pelantar(offshore)..hehheh...ayam goreng,lomang paneh,nasi impit..WOW!!=)Assalammualaikum..

QA/QC Officer

Assalammualaikum/Salam Sejahtera.

Kepada semua2 QC(Fresh cam aku)leh la try kalau rasa layak..kalau xlayak cam aku ni...kena tungguuuuuuu & bersabar la...=)

QA/QC OFFICERS
(Kuala Lumpur)

Responsibilities:

Develop, implement and manage the Quality Assurance and Quality Control requirements, procedures and contracts for pipeline and related facility construction projects.

Prepare QA/QC documents such as ITP, QA Plan, WPS/PQR and other project specific inspection and test procedures.

Perform internal audits/reviews as per ISO requirements. Responsible for maintenance of QMS as per ISO 9001

Ensure verification and inspection are consistent with criticality, statutory and contractual obligations

Liaise with Production, Projects and other relevant departments to ensure proper implementation of project quality plans.

Monitor and Control inspection & test activities performed by contractors.

Liaise with Client Inspector, Third party Inspector, DOSH and Authorized Inspector with regards to all QA/QC Matters.

Monitoring and resolving NCRs and CARs.Manage preventiveaction procedures.

Requirements:

Candidate must possessat least aBachelor's Degree in Engineering (Civil / Petroleum / Oil / Gas/ Construction Management / Structural / Mechanical or related discipline.)
Has at least 5 years experience in O&G industrywith relevant training in QA / ISO system in project environment
Must have at least 5 years experience dealing with steel fabrication / construction processes and familiar with welding, painting, fabrication processes.
Must be conversant with Quality System (ISO 9000); candidate will be Company’s Quality Management Representative
Has to coordinate Project QA/QC activities with both Client, Vendors and internal Project team to Project Quality requirements
Has the ability to work seamlessly with engineering, construction and operations contractors.
Must be able to perform related QC functions and inspections.
Must be able to work independently although part of a team environment.
Diligent, positive, have good leadership, problem solving, analytical skills and is results oriented
Flexible and able to work under pressure during challenging periods to meet project deadlines.
Good presentational skills both in written and oral English.

Interested applicants please apply IMMEDIATELY online or email a detailed resume with a recent PHOTOGRAPH (compulsory), stating CLEARLY your current and expected salary, contact numbers and email address to:

Angeline Ng, Director, Asia
Mobile : +60-172007892 (Malaysia)
Email : angeline.careermove@gmail.com
LinkedIn: http://www.linkedin.com/in/careermoveangeline
The compensation package for this position is very competitive, with attractive salary and benefits, and is comparable with international standards.

Very Important:
Please ensure you have deposited your CV with:

1. Photograph (recent)
2. Clear employment history
3. Current breakdown salary to EXPEDITE processing.

Only applicants selected for interviews will be contacted.

QC PAINTING INSPECTOR(IMPSA)

Advertised: 06-08-11 | Closing Date: 05-09-11

QC PAINTING INSPECTOR
(Perak - Lumut Port)



Responsibilities:

To report all matters regarding blasting and painting work.
Adherence to safety practices.
To check random on abrasive use and equipment.
Ensure all equipment use is according to safety requirement.
To take reading on all DFT status after painting and records on inspection painting report.
To update the progress and schedule of all painting works.
To check weather condition from time to time prior painting activities and inspection.
To liaise with production and erection team on all painting progress and schedule.
Painting application should carry out below 85% relative humidity and to be recorded.
To submit daily painting record to QA/QC Manager.
To follow strictly Inspection Test Plan, Painting procedures and Client’s requirement.
Perform any related duties as and when required by QA / QC Manager.
Responsible for ensuring that specification for surface preparation and painting system application comply with the Project Specification for Painting and Coatings document.
To use and maintain calibrated inspection equipment.
Prepare and maintain full records of all inspections performed, and shall make these available to the company on request.
Ensuring that surface preparation, curing and weather condition, comply with relevant standard.
Provision of protection on effect of climatic conditions on paint applications.
Application of painting products in accordance with the manufacturer’s recommendations.
Recording of all pertinent data using applicable logs and checklists.

Requirements:

Minimum SPM or equivalent and possessed certified certificate by IMM level II or equivalent
Minimum 3 years experiences in industrial painting from heavy industry.
Must have knowledge in relevant standards and specification e.g. British Standard, Steel Structure Painting Council, Swedish standard.
Knowledge in mechanical catalogues general assembly (GA), P&ID and other related drawings and operation of blast cleaning equipment and airless spray equipment for the application of heavy paints
Comfortable using Microsoft Office Word/Excel on a PC, producing a weekly report of work carried out.
Self propelled, used to project planning and meeting timescales, ordering spare parts/blasting material as required.

"An attractive remuneration package commensurating with experience, a career development program plus technological state of the art environment will be offered to the successful candidate"

If you feel you are the right candidate to fill-up the above position, please submit your resume, with details of your experiences, a passport size photograph copies of relevant certificates/ testimonials, current and expected salary too:

Human Resources Department
IMPSA (M) SDN BHD
Lot-8-3 Jalan Besar
Lumut Port Industries Park
Kg Acheh
32000 Sitiawan, Perak
Email: susan.lee@impsa.com

Petrofac E&C Sdn Bhd

Petrofac International is a global provider of facilities solutions to the Oil & Gas Production and Processing Industry and includes in its customer list several of the world’s leading integrated Oil & Gas Companies. Petrofac International is a fast-growing FTSE 100 company and is rapidly expanding in both on-shore and off-shore Oil & Gas activities with principal focus in the Asia Pacific Region. To implement our aggressive business plan in the Asia Pacific region, Petrofac E&C Sdn Bhd has recently opened a new Engineering and Construction office in Kuala Lumpur and has requirement for several key positions. Applications are invited for the following position:

CONSTRUCTION CO-ORDINATOR
(Kuala Lumpur)

Responsibilities:
Will report to the Construction Manager in Kuala Lumpur, Malaysia.

Main Responsibilities:

* Supervise Fabrication and Construction in a Shipyard for Jack-up Rig, FPSO prior to and during pre-commissioning upto Sail-Away.
* Fully conversant with piping NDT requirements, Pipe-Supports and other relevant Piping Codes and Standards.
* Drive the Mechanical Completion dossier by follow-up and clearance of punch-lists.
* Ensure that the Permit to Work system is fully implemented.

Requirements:

* Bachelor Degree in Engineering.
* Minimum 8 years of EPC Oil & Gas Construction co-ordination experience of which at least 5 years should be in a shipyard meeting Sail-Away and Mechanical Completion deadlines for Jack-up Rig and Platform Topsides.
* Experienced in Construction Co-ordination for Off-shore Platform Compressors, Separators, Diesel Generators, chemical injection skids, cargo pumps, Deck Cranes, steel renewals, Pipe-Bridges, cabling, ESD Systems, Utilities, Boilers, etc.
* Must possess good interpersonal skills and be able to communicate effectively at all levels.
* Competent in all Microsoft Office applications

PIPING SUPERVISOR - OFFSHORE
(Off-shore, Malaysia)

Responsibilities:
Will report to the Construction Manager in Kuala Lumpur, Malaysia.

Main Responsibilities:

* Oversee Piping fabrication and installation as per approved isometrics, GA Drawings and Pipe-Support General Arrangement Drawings.
* Co-ordinate piping installation with E&I cabling and Equipment Installation.
* Participate in piping hydro-test, pre-commissioning piping re-instatement of pipe-spools and valves, line-flushing and flange-bolt tightening prior to Sail-Away of Off-shore topsides.
* Work with Piping NDT team and piping subcontractors.
* Manual Valve pressure testing and installation, Pipe-Support installation, Equipment nozzle flange-bolt connections as part of punch-list clearance.

Requirements:

* Bachelor Degree in Engineering
* Minimum 8 years of relevant Piping Supervisor experience of which 5 years must have been in the Off-shore Oil and Gas industry.
* Fully conversant with Piping and pipe-Support Codes and Standards

ELECTRICAL SUPERVISOR - OFFSHORE
(Off-shore, Malaysia)

Responsibilities:
Will report to the Construction Manager in Kuala Lumpur, Malaysia.

Main Responsibilities:

* Oversee Installation, Testing and Pre-Commissioning of Turbine Generators, Switch-Gears, Transformers, Circuit-breakers, UPS, Air-Conditioning equipment and cabling for Jack-up Rig topsides in a Shipyard.
* Hands-on trouble-shooting of all faults on electrical machinery including associated control gear of electrical motors, Transformers and Switch-gear.
* Cable-tray installation and cable-pulling in an EPC Oil & Gas environment.
* Supervise Fire & Gas equipment installation.
* Equipment installation and cabling for Lighting and Power distribution for Living Quarters of Off-shore Platform/ FPSO.

Requirements:

* Bachelor Degree in Electrical Engineering.
* Minimum 10 years of relevant Electrical Supervisor experience with at least 5 years Off-shore Oil & Gas experience.
* Knowledge of Off-shore marine regulations such as ABS, DNV and USCG rules and standards such as IEC, NEC and NEMA.
* Must possess good interpersonal skills and be able to communicate effectively at all levels.
* Competent in all Microsoft Office applications


Preference will be given to Malaysian candidates. Qualified persons with immediate availability are required.

Interested candidates are invited to apply by stating qualifications, work experience, current and expected salary to:

Human Resource Department
Petrofac E&C Sdn Bhd
Suite 7.01, Level 7, G Tower,
No. 199 Jalan Tun Razak, 50400 Kuala Lumpur, Malaysia

Or you may e-mail to: hr.pecsb@petrofac.com

Only shortlisted candidates will be notified.

Closing date: 30 July, 2011

Job @ Chiyoda

Advertised: 13-06-11 | Closing Date: 13-07-11.

Chiyoda Malaysia Sdn Bhd. was established in June 1974 as the Turnkey Contractor (Engineering, Design, Procurement, Construction and Commissioning) in the petroleum, gas and petro-chemical industries. In our expansion programme, we are looking for suitable qualified and experienced personnel particularly malaysians for:


API-650 Tank Supervisor (K26)
(Sarawak - Bintulu)

Requirements:

* Possess diploma/degree in Engineering or its equivalent;
* Familiar with tank fabrication and erection work;
* Knowledge in API-650 Codes and Standards is required;
* Minimum 6 years of experience as Tank Supervisor in Oil & Gas Industry;
* Able to lead Subcontractor in executing construction Tank Work in accordance to quality and work schedule requirement;
* Having good in work planning, control and supervision work.

QC Inspector (Code:K28)
(Sarawak - Bintulu)

Requirements:

* Possess diploma/ degree in Civil/Building;
* Minimum 8 years working experience in QC Inspection work for Civil and Infra Work;
* Knowledge in detailed design work for Civil and Structural is an added advantage;
* Well versed with BS Code, ASTM, MS Code and JKR Standard;
* Have experience in construction quality control, QA/QC documentation requirement and inspection test plan.

Applications will be considered for both permanent and/or contract basis.

Interested candidates are encouraged to apply on-line.

Alternatively, you may email or send your resume, detailing your qualifications, post applied, current and expected salaries, with a recent passport-sized Photograph (NR) to the attention of:
The Administration Department,
Chiyoda Malaysia Sdn. Bhd.,
15th Floor, Menara Maxisegar,
Jalan Pandan Indah 4/2, Pandan Indah,
55100 Kuala Lumpur.
Fax No: 03-42970800
Email:
chiyoda@chiyoda.com.my

Source Inspection Coordinator @ SEEN

Advertised on 28-06-11. Application deadline on 28-07-11.

As an established engineering contractor in South East Asia, Shapadu Energy and Engineering Sdn Bhd (SEEN) offers wide range of services from Hook-up and Commissioning to Project Management, Onshore/Offshore Construction and Maintenance or combination thereof. Our Company has been active in the region since 1984 and is accredited with ISO 9001:2000 International Quality System Standards since September 2003. Through our workforce of over 800 employees and our best track record of 7 million hours without LTI, we have positioned ourselves in becoming the leading integrated offshore and onshore engineering contractor in the Asia Pacific region.

Our long term projection sees a place for talented individuals committed to growth and development in a secure environment. We are looking for experienced and suitably qualified candidates to join our organization for the following position(s) as:

Source Inspection Coordinator
(Kuala Lumpur)

Responibilities:

* Coordinate and ensure compliance with source inspection requirements.
* Monitor source inspector's activities and cost.

Requirements:

* Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Others) or equivalent.
* At least 5 year(s) of working experience in oil and gas source inspection is required for this position.
* Preferably Junior/Senior Executives specializing in Engineering - Others or equivalent.
* Familiar with international materials standards, pressure/process piping and vessel codes, building structural and electrical codes, NDT and welding procedures, ASME/ANSE codes, EMEPMI's practices and procedures, inspection and test plans.
* Contract positions available.

We offer a competitive remuneration package together with excellent benefits and opportunities for career progression.


Interested candidates are invited to submit their applications stating full personal particulars, qualifications, working experience, contact number, current and expected salary to:

The Human Resource Department
Shapadu Security Sdn Bhd
Wisma Berkat, Lot 10, Jalan Pelabur 23/1
Section 23, 40000 Shah Alam, Selangor Darul Ehsan

Email: career@shapadu.com.my

Saudi K-KEM Job Opportunities

Saudi K-KEM offering inspection services ranging from conventional NDT methods to the most advanced (Hi-Tech) NDT techniques available in the world market today.

Our inspection personnels are certified by the major international certification agencies such as API, AWS, NACE, TWI, BINDT as by Malaysian Institution.

We were in this business industries for more than 19 years and our company takes the greatest effort in pursuing the highest possible inspection quality in all projects in order to enhance our service quality as well as to meeting our client satisfaction. Saudi K-KEM is the first Saudi Malaysian NDT & inspection partnership company in Jubail KSA

01. NDT Technician Engineering Diploma in Mechanical having ASNT Level II MT/BT/UT/RI Min. 2 Years
02. Piping Inspector Mechanical Diploma / Mechanical Bachelor Degree Min. 3 Years in Piping Inspection as per API 570
03. Pressure Vessel Inspector Mechanical Diploma / Mechanical Bachelor Degree Min. 3 Years in Pipping Inspection as per API 510

Berminat send your cv to info@saudikkem.com atau contact alamat dibawah untuk keterangan lebih lanjut..

K-KEM Engineering Services Co. Ltd.
Lot 468, Jalan Perusahan 3
Bandar Baru Sg Buloh
47000 Salangor D.E
Phone : +603-61414915
Fax : +603-61414897
Email : kkem400@streamyx.com

Job @ Singapore

To all inspector yang berminat nak berkhidmat diluar negara..walaupun xjauh still luar Malaysia..heheh..Good Luck!!!!!!!!!

Advertised: 16-06-11 | Closing Date: 16-07-11.

As a premier recruitment & HR consultancy firm, TechSearch esteems to provide the best staffing solutions to our Clients whilst enhancing the career opportunities for our Candidates. TechSearch specializes in providing staffing solutions in the Technology sector through its Information Technology and Engineering Divisions.

Our proprietary search methodology and knowledge of the Technology sector enable us to meet our Clients' requirements in a timely and efficient manner. In addition, TechSearch's database of Information Technology and Engineering professionals would allow our Clients to select the best Candidate with both the right attitude and technical skills.

For more information, please visit us at www.techsearch.com.sg.


Quality Control Technician (QC/ NDT/ QC Inspector/ Mechanical)
(Singapore - East)

Responsibilities:

* Perform job inspection at first piece, in process and final inspection per the JIS plans.
* Perform First Article Inspection (FAI) and Delta FAI per AS9102 requirements.
* Conduct process/product and/or Certified Operator audits.
* Proper use and maintenance of gages and inspection equipments.
* Proper documentation including inspection stamping of quality paperwork.
* Keep workstation clean and hazard free.
* Comply with all EH&S procedures.

Requirements:

* NITEC qualification in Precision Engineering or equivalent.
* Minimum 1 year of experience in machine shop environment.
* Able to understand basic technical drawings and shopfloor maths.
* Basic command of written and spoken English.
* Knowledge of Co-ordinate Measuring Machine (CMM), Gear Inspection and Non Destructive Testing (NDT) will be added advantage.
* Able to perform rotating shifts.
* Applicants should either be Singaporean, Malaysian or Singapore PR.

Location: East
POSITION IS OPEN TO SINGAPOREAN, PR, AND MALAYSIANS.


Interested candidates, please send your cv in MS-word format to recruit.pz@techsearch.com.sgstating your current and expected remuneration package.

QC Inspecttor @ KNM

Advertised on 28-6-11. Application deadline on 28-7-11.

KNM, a public listed Group in Malaysia presence in 14 countries with a total workforce of 5,000. It is a leading manufacturer and turnkey provider of process equipment, process units biofuel, renewable energy and power plants. In line with our growth strategies, we are currently seeking qualified and experience personnel to join our group:-

QC Inspector
(Pahang - Gebeng/ Kuantan)

Responsibilities:

* To carry out all QC & piping inspection activities.
* To ensure all QC documentations are timely prepared and submitted.
* To perform all QC/Welding inspection of the works at shops.
* To ensure all fabrication work are performed to the quality as per specifications and requirements.

Requirements:

* Diploma/certificate in Welding Technology.
* Professional certificate in Welding & NDT is a complement.
* 2-5 years working experience in pressure vessels & boilers.
* Knowledge of ISO 9001, ASME SEC II, V, VIII and IX, BS, API etc.
* Able to propose remedy and quality improvement initiatives.
* Applicants should be Malaysian citizens or hold relevant residence status.
* Contract position available.


Interested candidates, please write-in / fax-in / e-mail together with details resume to :-

The General Manager (HRD)
No. 15, Jalan Dagang SB 4/1
Taman Sungai Besi Indah
43300 Seri Kembangan
Selangor Darul Ehsan

Tel No: 03 – 8946 3000 Fax No: 03 – 8944 1363
Email:recruitment@knm-group.com

Various Inspector Position

SGS (M) Sdn Bhd are looking for experienced and qualified personnel to fill the positions for Muprhy Oil GOPA and GOPB additional flowlines, SNPA and SNAA Platforms and Pipelines Works job based in Bintulu. Please see the required positions:

1. Welding Inspector
2. Coating Inspector
3. Mechanical Inspector
4. E&I Inspector

Requirements for each of the positions are as below:

1. Welding Inspector
- 10 year of relevant industry experience
- Fully certified to ANST Level 2 by Inspection Company (Certificates non transferable) or CSWIP or PCN
- Conversant in computer skills (especially MS Office including MS Project and MS Access) will be an added advntage

2. Coating Inspector
- 10 years of relevant industry experience.
- Personnel to have at least five (5) years experience in QA and QC of coatings systems for marine environments.
- 3 years of experience in QA/QC of coating and cathodic protection systems associated with FPSO hull/conversion, new build fixed platform or DTU.
- Certified NACE Level II (minimum), preference will be given to Level III or internationally approved equivalent.
Inspector shall be familiar with offshore oil industry coatings applications.
- Familiar with cathodic protection including impressed current system and classification requirements.
- Conversant in computer skills (especially MS Office including MS Project and MS Access) will be an added advantage.

3. Mechanical Inspector
- 10 years of relevant industry experience
- Higher secondary school certificate
- Relevant diploma or trade certificate with a minimum of 5 years working experience in performing oil and gas equipment experience
Proven ability to interpret drawings, codes and standards and apply that knowledge to field inspections, surveillance and audits of offshore oil and gas mechanical equipment
- Experience on pumps and rotary equipment related to offshore oil and gas equipment

4. E&I Inspector
- Relevant diploma and/or trade certificate or equivalent with a minimum of five (5) years related working experience in performing electrical and instrumentation inspection services in the oil and gas indsutry; or
- Higher secondary school certificate with a minimum of ten (10) years working experience in performing electrical and instrumentation inspection services in the oil and gas industry
- In-depth knowledge of DCS/MCC Systems, Low, Medium, High Voltage equipment and terminations; instrumentation and controls, up to and including loop checking
- The availability to intepret drawings, codes and standards and apply that to field inspections, surveillance and audits of electrical and instrument applications

Interested and meet the minimum requirements as above? Then send your comprehensive resume, relevant certificates and expected salary to shaza.shaharom@sgs.com on or before 8 July 2011.

Only shortlisted candidates will be notified.

QC Inspector Victor Buyck Malaysia

Victor Buyck Malaysia is the Asian fabrication arm of the Victor Buyck Group, which is the largest structural steel fabricator in Belgium and one of the top ten fabricators in Europe. We currently have vacancies for our plant in Seremban, N. Sembilan. We invite suitable and qualified professionals to join our team.
QC Inspector

Responsibilities:

* To check and ensure that all works done are in accordance to the documented quality requirements.
* Perform Incoming Quality Control Check, In-process and Final Inspection of Steel structure fabrication & etc.
* Inform QA/QC Manager on any Non Conforming matters found during inspection.

Requirements:

* Diploma in Civil & Structural/ Mechanical/ Electrical & Instrument Engineering or equivalant.
* Minimum 2 years and above working experience in the similar field.
* Familiar with ISO 9001 and QC related international and national standards.
* Those with previous experience in steel fabrication construction works will be advantageous.
* Quickly and positively to all situations with poise and efficiency.

Candidates are required to send their applications complete with comprehensive resume with full details of working experience current and expected salary, photocopy of certificates and passport-sized photograph to:

Please submit a detailed application stating your qualifications and experience to:

hr@victorbuyck.com or zurrah@victorbuyck.com

or fax to 06-7649005 or mail to:

HR Department
Victor Buyck Malaysia Sdn Bhd
Lot 51, Oakland Industrial Park,
70200 Seremban,
N. Sembilan.

TWI Malaysia (employed by TWI UK) -NDT Consultant

The NDT Technology Group is expanding due to a significant order growth. Over the past eleven years, we have
delivered significant and sustained growth and are seeking talented individuals to enter this fast-moving team
environment to underpin and drive our technical excellence and expanding market share. Our activities include
advanced NDT R&D, Structural Health Monitoring, Condition Monitoring and Numerical modelling. We also
develop and review the NDT procedures and implement innovative inspection techniques for the Oil & Gas,
Power Generation, Aerospace, Automotive and Civil and Construction industries in the following methods:
MT, PT, RT & UT (PAUT&TOFD), LRUT, Qualifying and certifying NDT personnel and equipments.

We are currently establishing a Total Quality Inspection (TQI) team to be based at TWI SEA (Malaysia) and we
are looking for a Level 3 candidate to support the growth opportunities in the Far East region. This role will link
into our Engineering Services activities in SEA in accordance with Risk Based Inspection (RBI) and Engineering
Critical Assessments (ECA) principles and selection of appropriate NDT techniques.

The candidate will have the following roles, but not limited to:

NDT procedure development and qualification

NDT system (equipment, procedure, operator) performance demonstration

Probability of detection studies

Interpretation of codes and standards

You will also receive support from the UK NDT team on the latest R&D activities and achievements and will
participate in its TQI initiative to improve inspection working practices through focussing on client needs,
continuous improvement and team building.

To be selected for interview you must have at least a 2:1 degree or equivalent qualification in physics, mechanical,
electrical/electronics or materials engineering; and relevant industrial experience. Proficiency with the design, test
and analysis tools relevant to the function with practical hands-on experience in multiple NDT modalities
(e.g. UT, PT, MT, RT, PAUT, TOFD, LRUT) and knowledge of relevant codes and standards ASME, API,
AWS & DNV are required.

Desirable attributes are: Substantial hands-on multi-modality NDT expertise - ASNT/PCN/CSWIP Level III
equivalency with project management experience, NDT field inspection experience with an emphasis on power
generation and oil & gas and knowledge of NDT inspection systems, personnel training and a broad
understanding of mechanical principles, welding and machining practices.

You will be required to demonstrate good team and networking abilities, initiative and self-motivation, and
strong verbal and written communication skills.

Please apply by email enclosing your full CV, with a letter stating your current salary, quoting reference:
WND/48/11, to recruitment@twi.co.uk no later than 1 July 2011.

Please quote the reference number in all correspondence.

Structural Welding Inspector at Bhp Billiton

All qualified Structural Welding Inspector are required to forward their resumes to our email: recruitment@bhp-billiton.co.cc

location:Kuala Lumpur
Good Luck!!!!

Gulf Petroleum signs deals for RM17b hub

KUALA LUMPUR: Qatar-based Gulf Petroleum (M) Sdn Bhd (GPLM) has signed agreements with consortium groups from China, Hong Kong and India to jointly develop its RM17 billion integrated oil and gas complex in Port Dickson.

Marmagoa Steel Ltd and Rukmani Finance Pte Ltd, which are led by India-based businessman Ashok Mittal, have formed a consortium with a local partner - Extrarich Marine Sdn Bhd.

Together, this consortium will undertake the financing, construction and supply of steel to build storage facility at the complex.

China-based telecom solutions provider Huawei Technologies has also come onboard to participate in the development of the complex. The group will cover the information technology and telecommunication aspects of the plant.

Meanwhile, Hong Kong-based Oriental Air Energy Investment Corp Ltd will undertake the financing and construction of the power supply requirements of the complex by utilising patented green air- powered technology.

GPLM managing director Nor Azmi Abdullah said the group has received official proposals from 35 countries worldwide interested to participate in the setting up of the complex. They include banking groups, government-linked investment companies and oil and gas companies.

"We will have more partnerships like the ones signed today. We are carefully studying the proposals at this stage," he said during a media briefing yesterday.

Construction of the complex would begin once the company has finalised outstanding regulatory issue with the authorities. "We hope to start construction by second quarter next year," he said.

The complex, targeted to be fully completed by 2015, is located at Port Dickson on a 607.5ha of land. It would include a refinery, petrochemical plant and storage facilities and would be able to produce about 150,000 barrels of oil per day.

The complex was intended to be GPLM's regional hub for its activities in Asia Pacific. The company had earlier secured crude oil supply among consortium members and has finalised initial agreements on products off-take arrangement with several countries within Asean and in Asia Pacific.

ASME REVIEW

Success!!!success!!!!yahoo..!!!!aku baru je habis ASME review pada 25 to 27 may minggu lepas..penat gler ar..dalam bahasa pasarnye la...hehheh..tapi satu pengalaman baru la bagi aku yang pertama kali join ASME review ni..bagi inspector2 kat luar sana yang dah otai ataupun dah biasa ngan ASME review ni kacang je la bagi diorang..kalu sape2 yang ada pengalaman boleh2 la share kat cni..bukan apa boleh bertukar tukar pandangan dan ceritakan pengalaman..ASME team leader yang datang kat tempat aku adalah seorang berbangsa jepun..namanya Hitoshi Kishida ney..very detail one la this japanese..every pages akunye qc manual ada komen..bukan akunye,company tempat aku keje la..sampai cuti la boss aku pas habis ASME review..demam la 2 banyak sangat nak kena revise..ape yang kita revise or ape yang ASME team leader ni komen kita kena close secepat mungkin sebelum closing review.NCR ataupun Non-Conformance Report pun kena close sebelum closing review..kalau x kena 30days follow up bro..silap2 xleh renew nanti..hehe..ASME team akan check sumenya la dari design sampai ke Manufacturer Data Book.termasuk la ape yang ada dalam qc manual..Antara soalan2 yang Mr.kishida san ni tanya aku adalah camne aku review mill certificate,cam ne aku wat material receiving inspection,review PWHT chart and etc..tapi sebelum actual ASME review mesti ada pre-joint review daripada AIA yang company kita appoint..cam kat tempat aku boss aku appoint ABS Consulting..AIA ni akan tolong la sebelum actual ASME review,tapi masa actual ASME review AIA ni akan jadi team pada ASME Leader..that means diorang pun akan audit kita masa 2..dalam kata lain dia berpaling tadah la..hohohoh..pada masa actual review je la..lepas je habis ASME review ni rasa cam xde pe sangat pun..as long kita wat as per code,follow qc manual rasanya xde masalah..by the way new thing for me la...realy interesting..hope good information for all of you out there especially for those new inspector like me..all the best...chaiyok!!!!

QC Inspector- Oil and Gas 6 months contract

An international oil and gas firm based in Port Klang are in search of QC Inspector from manufacturing or electronic or oil and gas industry. Details below:
The work involved is to:
1) carry out inspection of valves/solenoids manufactured in house
2) prepare reports for submission to client

Expectations:
1) Techncial qualifications in mechanical engineering (welding/NDT qualifications are not required), with manufacturing backgorund
2) Good report writing skill (compulsory)
3) Proficient in English as this position requires the inspector to communicate over telephone and in writing to client
4) 6 months contract, extendable, expected start date 1st July 2011
5) candidate must be prepared for some night shift work as when required
6) Position is based in Port Klang Free Zone, Pulau Indah
7) Normal working hours is 8.00 to 6 pm. Overtime applies after that

interested candidates may submit your detailed resume in MS word format to info@chisgroup.com

Ramunia signs FPSO deal

PETALING JAYA: Ramunia Holdings Bhd has signed an agreement with Drydocks WorldDubai LLC and NTM Refection II AS for a floating production, storage and offloading (FPSO) deep producer vessel, known as the MT Laurita.

Ramunia told Bursa Malaysia yesterday that the arrangement would provide the company with an opportunity participate in the development of marginal oilfields and deepwater fields in Malaysia and the region.

“The arrangement also presents an immediate opportunity for Ramunia to participate in any direct negotiations, invitation to bids and requests for new proposals for FPSOs, by Malaysian and regional oil companies,” it said.

The company said it also planned to expand into the offshore floating business in the upstream oil and gas sector to take advantage of the significant spending on the domestic oil and gas sector.

Quality Control Inspector (Location: Nilai)

Master Jaya Environmental Sdn Bhd Sdn Bhd


Master Jaya Environmental Sdn Bhd, established since 1983, is a market leader and total solution provider in Malaysia for innovative Air Pollution Control Equipment and Systems, and Steel Fabrication. In line with our expansion programme, we are looking for qualified, dynamic and result-oriented personnel to join our professional team.

Requirements:

Degree / Diploma in Mechanical/ Manufacturing Engineering.
Minimum 5 years hands-on experience in quality control, preferably in steel / sheet metal fabrication, fit-up and welding process.
Familiar with ISO 9001 QMS, Welding Codes & Procedures and able to work independently.


Interested applicants are invited to apply by online, fax or write-in their resume, current and expected salary as well as recent passport size photograph (n.r.) to:

Master Jaya Environmental Sdn Bhd (201551-K)
Wisma Masterjaya, 20, Jalan Taming 3,
Taming Jaya Industrial Park, 43300 Seri Kembangan, Selangor.
Fax No. : 03-89626211
Website: www.masterjaya.com.my

Only short-listed candidates will be notified.

Inspector Job at SEM Inspection

S.E.M INSPECTION SDN. BHD offers for candidates that meets the requirement and qualification as mention below as applicant for Turnaround at Petronas Methanol (LABUAN) (PML) and shutdown or term contract at MLNG.


I .PML

A. Senior Inspector
Qualification:

1. Minumum 10 years of working experience in in-service static Equipment Inspection
2. Possess valid certificates of CSWIP 3.1 Welding Inspector or equivalent
3. Minumum Valid API 510, ASNT Level 2 or;
4. Equivalent for at least one NDT method



B. TA Equipment Inspector
Qualification:

1. Minimum 5 years working experience in static equipment inspection
2. Minumum Valid API 510 certification



C. Welding Inspector
Qualification:

1. Minimum 5 years working experience in welding inspection
2. valid certificates of CSWIP 3.1 Welding Inspector or equivalent certificate


D. Videoscope Inspector
Qualification:

1. Minimum 5 years working experience in Remote Visual Inspection
2. Minimum 3 times experience as Remote Visual Inspector/videoscope Inspector in Oil and Gas Industry.




II. MLNG

- Minumum requirement shall be over 5 years experience in Plant Maintance or API 510 or API 570 or WI.
- Position available are Vessel Inspector, Piping Inspectior, Welding Inspector and RBI Inspector



All candidates should submit their CV/Resume and copy of certificates by Online Job Application Form or email to ashraf@seminspection.com .

ASME REVIEW(INTRO....)

Salam to all inspectors..Dah nak dekat sebulan x update blog ni..hehe..biasa la nak jadi inspector yang berjaya kena la menyibukkan diri dengan persekitaran disekeliling kita..tambahkan ilmu dan pengalaman..sebelum ni aku pernah cakap pasal ASME review..ari ni aku cter ckit ape itu ASME review..sebelum aku cter kalau ada salah n silap tolong2 lah perbetulkan ye..aku baru first time involve ASME review ni..firsly,aku terangkan pe makna disebalik ASME..mungkin ada yang xtau dengan singkatan perkataan tersebut..ASME stand for American Society of Mechanical Engineer..ASME review ni dijalankan untuk renewal license setiap 3 tahun sekali dimana license akan dikeluarkan oleh ASME board kat UK..dlam erti kata lain ASME stamp la..kebanyakan fabricator mesti ada ASME stamp ni..macam kat tempat aku ada U,U2,S & R stamp..ASME stamp ni digunakan bila client/owner required vessel yang dibuat certified to U,U2 & S stamp tuk construction to ASME VIII Div.1,U2 plak untuk construction to ASME VIII Div.2,S untuk construction ASME I & R tuk repair vessel,boiler and or piping..ASME stamp ni ada banyak lagi,contohnya U3,PP,N,UM,UV,E & lain2 lagi la...lain2 stamp ni aku pun xpernah tgk..heheheh..ASME review akan diaudit oleh ASME committee sendiri...kat tempat aku ni yang akan datang adalah orang Jepun..orang jepun ni detail ckit..to all inspector yang ada experience bagi2 la pendapat ye..Kat tempat aku akan dijalankan selama 3 ari..1st day tuk design review,2nd day kat Shah Alam workshop tempat aku jaga..3rd day kat klang workshop..aku kat klang workshop tapi disebabkan ASME review ni terpaksa la ulang alik ke shah alam untuk ASME review..kalau company 2 ada banyak workshop setiap workshop kena berdaftar & kena audit untuk dapatkan ASME stamp..ASME review ni setiap workshop kena prepare satu demo vessel untuk ASME committee ni inspect..ada masa aku upload gambar vessel ASME review ye..itu la sedikit sebanyak yang aku boleh terangkan..ok la inspector sume,masa dah mencemburui la...hehehhe...jap lagi ada PIM ngan client dari Sime Darby untuk project tank fabrication..Babai...

QC Inspector(KNM)

Advertised on 27-4-11. Application deadline on 27-5-11.

KNM, a public listed Group in Malaysia presence in 14 countries with a total workforce of 5,000. It is a leading manufacturer and turnkey provider of process equipment, process units biofuel, renewable energy and power plants. In line with our growth strategies, we are currently seeking qualified and experience personnel to join our group:-

QC Inspector
(Pahang - Gebeng/ Kuantan & Sabah - Kota Kinabalu)

Responsibilities:

• To carry out all QC & piping inspection activities.
• To ensure all QC documentations are timely prepared and submitted.
• To perform all QC/Welding inspection of the works at shops.
• To ensure all fabrication work are performed to the quality as per specifications and requirements.

Requirements:

• Diploma/certificate in Welding Technology.
• Professional certificate in Welding & NDT is a complement.
• 2-5 years working experience in pressure vessels & boilers.
• Knowledge of ISO 9001, ASME SEC II, V, VIII and IX, BS, API etc.
• Able to propose remedy and quality improvement initiatives.
• Applicants should be Malaysian citizens or hold relevant residence status.
• Contract position available.

Interested candidates, please write-in / fax-in / e-mail together with details resume to :-

The General Manager (HRD)
No. 15, Jalan Dagang SB 4/1
Taman Sungai Besi Indah
43300 Seri Kembangan
Selangor Darul Ehsan

Tel No: 03 – 8946 3000 Fax No: 03 – 8944 1363
Email:recruitment@knm-group.com

Welding Inspector(Hercules Manpower Sdn. Bhd.)

Advertised: 26th April 2011 | Closing Date: 27th May 2011
Welding Inspector
Work Location : Sabah

Salary: Negotiable

Jobs Vacancies:

8 Welding Inspector and Evaluator of job at site (Certified Welding Inspector for Oil & Gas Industries).

Interested candidates are invited to apply via JobsCentral(http://www.jobscentral.com.my/view/simpleProfile/9108/28517)

RM1.15bil shot in the arm for Sime

PETALING JAYA: The RM1.15bil contract win by Sime Darby Bhd's wholly-owned Sime Darby Engineering Sdn Bhd to fabricate topsides for the Kebabangan northern hub development project is viewed positively by analysts as it shows progress for the conglomerate to turn around losses in the oil and gas (O&G) division.

The project is secured from Kebabangan Petroleum Operating Company Sdn Bhd.

“This is good news as the contract more than doubles the group's order book to RM2.2bil. It will enhance the financial year (FY) 2012 to 2013 earnings by 1% and boost investors' confidence in the turnaround efforts for the oil & gas unit,” said CIMB Research senior regional analyst Ivy Ng.

AmResearch analyst Alex Goh said this contract will cause Sime's O&G order book to surge by 77% from RM1.5bil as at Dec 31, 2010 to RM2.7bil.

He believes this domestic contract could lead to a turnaround in the O&G segment, which recorded a loss of RM24mil in the first half of 2011.

Goh said that as the contract would be undertaken over 29 months from April 22, 2011, full-year contribution from this job would materialise in Sime's FY2012-13.

It adds that the Kebabangan contract could marginally add RM20mil or 0.5% to Sime's earnings over the period.

Ng said this contract win was not a surprise as the group had been bidding for a few large domestic projects for some time.

It marks Sime's first local contract win since the cost overruns for its energy & utilities unit grabbed the headlines last year. Sime Darby's former chief executive officer CEO Datuk Sri Zubir Murshid was shown the door in connection with the cost overruns involving projects in Qatar and the Bakun hydro-electric dam.

Sime's total provisions for its 2010 financial year, of which the O&G projects in Qatar accounted for a staggering RM2.08bil.

Meanwhile, another analyst added that looking at Sime Darby's track record, it had always delivered when it came to local projects.

“It only got into trouble when they went overseas, perhaps because they were not familiar with the policies or environment there. Hence, the execution risk of a local contract is a lot lower,” said the analyst.

Sime Darby Engineering has two ongoing projects with Oil & Natural Gas Corp Ltd (ONGC).

The first is the fabrication of five well-head platforms worth RM233mil to be completed in April 2011, and the second is a lump-sum turnkey offshore engineering, procurement, construction, installation and commissioning contract for a central processing platform (33,600 tonnes) and living quarters worth RM1.6bil due in March 2012.

At present, Petronas Carigali has a 40% stake in KPOC, Shell 30% and ConocoPhillips 30%.

The Kebabangan platform comprises a single-integrated drilling, oil and gas production, utilities and quarters topsides on a fixed eight-leg jacket in 142-m deep water.

Kebabangan will be the hub for development of deepwater and on-shelf oil and gas field off northern Sabah.

Gas produced from the Kebabangan cluster of the Kebabangan, Kamunsu East, Kamunsu East Upthrown and Kamunsu East Upthrown Canyon fields is destined for Petronas' liquefied natural gas complex at Bintulu.

Last month, Sime Darby Engineering announced that it will see a write back of some RM100mil in its profit-and loss-statement from a settlement agreement with Maersk Oil Qatar A/S for a contract signed four years ago.

Sime Darby Engineering entered into a US$632mil contract on Feb 20, 2007 with Maersk Oil Qatar to design, engineer, procure and transport to the latter's designated off-shore location, install, tie-in and deliver the facilities and components forming part of the latter's block-5 development plan 2005.

Both companies reached a settlement on completion of outstanding works and closed out on claims and payment issued under the contract pursuant to a close-out agreement dated March 17, this year.

Electrocorr Engineering Sdn. Bhd.(Coating Supervisor/Blaster/Painter)

ElectroCorr Engineering Sdn. Bhd. a dynamic high technology, engineering services firm with offices in Klang and Kerteh, is looking for coating supervisor, blaster and painter with internal painting & blasting in oil & gas plant, offshore top side for various projects.


Advertised: 15-04-11 | Closing Date: 15-05-11
Coating Supervisor/Blaster/Painter
(Selangor)

Requirements:

IMM Certified Coatings Technician Level I & II (for blaster and painter) and NACE CIP Level I (for Coating Supervisor) posts.
Requires a minimum of 3 year experience in internal tank, process piping and offshore top side blasting & painting projects with Oil & Gas companies .
He has attended Oil & Gas Safety Passport (OGSP or NPSP) and Confined Space training conducted by NIOSH.
He should also have organizational skills to plan, schedule and document the work as assigned.
The Coating supervisor must be a leader and be experienced supervising and instructing painters, blasters, water jetters and semiskills.
Administrative skills should include the ability to understand clients’ technical specifications and able to learn computer data entry.
Must have a valid driving licence and be physically capable of field work.

If you aspire to be part of our team, you are invited to send your comprehensive resume (including current and expected salaries) via email to electroc@streamyx.com. Kindly indicate position applied for in the subject header of your email.

Petronas sells Cairn India stake for RM6.35bil

KUALA LUMPUR: Petroliam Nasional Bhd (Petronas) has sold its entire 14.9% stake in Cairn India Ltd for about US$2.1bil (about RM6.35bil).

Petronas said in a statement yesterday that it had sold all its 283.4 million shares in Cairn India held via Petronas International Corp Ltd.

“The transaction brings to a close a successful association as a shareholder with Cairn India since 2006,” the national oil company said.

Earlier, news wires reported that Petronas had disposed of its stake in three transactions on the Bombay Stock Exchange.

Cairn India, which explores and produces crude oil and natural gas in India, is the operator of the country’s largest oil field on land.

The company, listed in Mumbai, is controlled by Edinburgh-based Cairn Energy Plc, which is looking to sell 51% of Cairn India to mining billionaire Anil Agarwal’s UK-listed vehicle, Vedanta Resources Ltd.

Reuters reported that 283 million shares changed hands in block share market deals and that most of Cairn India’s shares were sold at 331 rupees (US$7.40) apiece.

According to data compiled by Bloomberg, a total of 277.27 million shares were traded at 331 rupees (US$7.41) apiece in two blocks of deals and 5.07 million shares changed hands at 335 rupees each.

Petronas might have sold its entire holding in the open market, Bloomberg reported, citing unidentified people.

The reports said there had been speculation that Petronas might not tender shares in an open offer where the price might be at a discount to the current market price and would rather go ahead and sell it in the open market.

The wire reports said the names of the buyers and sellers were not immediately disclosed.

Following Petronas’ disposal, a unit of Vedanta, Sesa Goa Ltd, bought 11% stake in Cairn India.

Petronas first ventured into Cairn India in September 2006 by purchasing a 10% stake for US$700mil before Cairn India was listed in January 2007.

It has spent about US$1.3bil in Cairn India to own a 14.9% stake, with its latest purchase of a 2.3% stake taking place in October 2009 for some US$240mil.

Vedanta snaps up 11pc of Cairn India for US$1.5b

MUMBAI, April 19 — Vedanta Resources Plc has bought an 11 per cent stake in Cairn India , a source said, pushing ahead with plans to take control of the Indian oil and gas company despite regulatory delays plaguing the US$9.6 billion (RM29.08 billion) deal.

Vedanta’s move to acquire Cairn India is part of London-based mining magnate Anil Agarwal’s plans to grab a slice of India’s oil reserves and get exposure to surging demand.

But its agreement to buy a 40 per cent to 51 per cent stake from Cairn Energy is yet to be cleared by the Indian government. Vedanta is also aiming to buy a further 20 per cent through an open offer.

Vedanta bought the 11 per cent stake from Malaysia’s national oil corporation Petronas , a source familiar with the matter said. The source could not be named as he was not authorised to speak to the media.

Petronas sold the remainder of its stake, almost 4 per cent, to some foreign portfolio investors, the source added.

Analysts said Vedanta’s US$1.5 billion share purchase in Cairn India would be useful if it fails to get a big response from minority shareholders for its open offer.

“This is a strategic move by Vedanta and it makes the open offer inconsequential,” said Jagannadham Thunuguntla, head of research at brokerage SMC Global Securities.

“Vedanta will now be able to get a comfortable controlling stake in Cairn India even if the open offer response is very poor,” he said. “But all this is subjective to the government clearing the deal and that is an unknown factor.”

Spokesmen for Cairn India and Vedanta in India did not respond to calls by Reuters seeking comment on the block deal. Petronas confirmed it had sold its stake.

Vedanta’s deal to buy a majority stake in India’s No. 4 oil and gas company hasn’t received approval from the Indian government, eight months after its announcement, due to a dispute in royalty payments.

The offer by Sesa Goa to buy up to a 20 per cent stake in Cairn India was launched on April 11 and closes on April 30.

Thunuguntla said many investors would not tender their shares because the gap between the open offer price and the market price had narrowed significantly.

Vedanta will join BHP Billiton as the only miner with large oil interests.

Cairn India shares rose as much as 3 per cent after the block deal today to touch 346.15 rupees, slightly below the 355 rupees that Vedanta’s India unit Sesa Goa is offering to Cairn India minority shareholders.

By 1043 GMT, Cairn Energy shares were up 1 per cent in a FTSE index up 0.4 per cent .

Vedanta had said Cairn India had the potential to almost double current production to about 240,000 barrels of oil per day — around a quarter of India’s output — allowing it to benefit from rising demand amid industrialisation, economic growth, and an expanding population.

Vedanta bought the 11 per cent stake at 331 rupees (US$7.40) a share, the source said, reflecting a discount of 1.6 per cent to Cairn India’s closing price yesterday.

Cairn India saw 283 million shares, or 14.9 per cent of the share capital, changing hands in block share market deals on the Bombay Stock Exchange today.

“What this says is they are serious about the deal. They are putting their money where their mouth is, signalling intent and perhaps subtly turning up the pressure (on the Indian government),” a London-based analyst told Reuters.

Bank of America Merrill Lynch represented Petronas in the deal.

Big deal

Vedanta’s deal to buy Cairn’s India assets, which would be the biggest acquisition in the Indian oil sector, is widely seen as a litmus test for foreign investment into India.

Vedanta and Cairn Energy have extended the deadline to seal the deal to May 20, after they failed to get the approval from the Indian government within the previous deadline of April 15.

This month, the Indian government referred the matter to a panel for further review, after discussing it in a meeting in which it was expected to make a final decision.

The deal has been delayed by a dispute over royalty payments by Cairn India’s partner, state-run Oil and Natural Gas Corp .

ONGC, which has a 30-per cent holding in the Cairn-operated Rajasthan fields in western India, pays 100 per cent of the royalties. India’s oil ministry has been pushing to share the royalty burden between ONGC and Cairn India.

Both Cairn and Vedanta have opposed that move. Any changes in the royalty structure will impact valuations and may jeopardise the deal, analysts have said. — Reuters

QC Inspector - Steel Structure (Chiyoda Malaysia Sdn Bhd)

Chiyoda Malaysia Sdn. Bhd., a well-established turnkey contractor since 1974, majoring in the Engineering, Design, Procurement, Construction and Commissioning for oil, gas and petrochemical industries are inviting capable, dynamic and enthusiastic talented individuals (Malaysians) to join us for the following positions:

QC Inspector - Steel Structure

Requirements :

Posses minimum Diploma/relevant certificates as QC Inspector.
Minimum 8 years of experience in working as QC Inspector with minimum 3 years as Steel Structure Inspector.
Knowledge of the AWS D1.1 or equivalent standards.
Preferable Welding Inspector Certified or CSWIP 3.0/3.1.
Certification of UT-II, RT-II, MT-II, PT-II, by ASNT or any Malaysian NDT Regulation.
Have experience in construction quality control, QA/QC documentation requirement and inspection test plan.




Applications will be considered for both permanent and/or contract basis. Interested candidates are encouraged to apply through email at chiyoda@chiyoda.com.my . Alternatively, you may send your resume, detailing your qualifications, post applied, position code, current and expected salary, with a recent passport-sized Photograph (NR) to the attention of the following not later than 14th May 2011


The Administration Department,
Chiyoda Malaysia Sdn. Bhd.,
15th Floor, Menara Maxisegar,
Jalan Pandan Indah 4/2, Pandan Indah,
55100 Kuala Lumpur.
Fax No: 03-42970800

QA/QC Inspector (Emerson Process Management Manufacturing)

Emerson Process Management Manufacturing (formerly known as Fisher Rosemount) is the company known for the design, manufacture and supply of world-class control valves for the process control industry. Our products are used in the oil & gas, pulp & paper, refinery, F&B, chemicals & petrochemicals, power, metal & mining and semiconductor industries. Fisher, established since the 1880s, is now a leading brand and a division of Emerson, a Fortune 500 company present in over 600 locations in 150 countries worldwide.

Emerson Process Management Manufacturing in Nilai, is Emerson's largest control valve facility in Asia Pacific. Our main business focus is quality, safety and customer service. We are committed to serving our customers with nothing less than the best. We always make the effort to ensure the people we hire are individuals who can work well under pressure and are performance driven. If this describes you, and if you have no problem with commitment, come join us today!

Advertised on 7-4-11. Application deadline on 7-5-11.

QA/QC Inspector
(Negeri Sembilan)

Responsibilities:

Perform receiving material/instruments, machined parts and final products to meet the established company quality standards.
Perform NDT or any inspection when required
Exercise skills and decision in the use of precision gauges, measuring and test equipment.
Perform receiving, first article, first piece or in-process.
Organize rework activities as part of MRB disposition.
Summarize inspection results, highlight quality problems and recommend actions for meeting quality objectives and continuos improvements.
Follow written instructions to ensure compliance with quality standard and customer special orders.

Requirements:

Candidate must possess at least Professional Certificate in Engineering (Mechanical), Engineering (Mechatronic/Electromechanical), Engineering (Metal Fabrication/Tool & Die/Welding), Engineering (Petroleum/Oil/Gas), Engineering (Industrial) or Diploma or equivalent.
At least 2 year(s) of working experience in the related field is required for this position.
Preferably Non-Executives specializing in Manufacturing/Production Operations or equivalent.
Ability to interpret and perform inspection in accordance with design drawings, technical procedures/standards and instructions.
Experiences in manufacturing and/or quality assurance/quality control.
Skills in using precision measuring, inspection and test equipment.
Effective oral and written communication skills.


3 Full-Time positions available.

We have a positive policy of recognizing excellent performance, therefore if you have high enthusiasm to excel and develop a long-term career within the organization, you may be the person we need.

Interested candidates are invited to write/fax in with full personal particulars, details of qualifications and experience, current and expected salary and a recent photograph before 07 May 2011 to:

EMERSON PROCESS MANAGEMENT MANUFACTURING (M) SDN BHD (400431-P)
(Formerly known as Fisher-Rosemount Manufacturing (Malaysia) Sdn Bhd)
Lot 13111, Mukim Labu, Kawasan Perindustrian Nilai
71807 Nilai, Negeri Sembilan
Fax: 06 - 7998454

(Only shortlisted candidates will be notified)

Winner - Human Resource Minister Award 2002 for Excellence in
Human Resource Development.

PLEASE LOG ON TO JOBSTREET FOR APLLY!!GOOD LUCK

Pressure Vessel (Dish End & Nozzle Fit up)

Assalammualaikum to all Inspector...

Dah lama aku xupdate blog aku ni..bak kata........(nak letak nama tapi rasa cam private n confidential lak nama dia,nanti xpasal2 kedalam...hehehe..)"Dah Lama Dah"..aku nak continue pasal fabrication pressure vessel ni..selepas shell can siap disambung(for vessel 2 atau lebih shell can la)welder akan start welding joint tersebut...complete je welding,contractor akan wat marking untuk opening seperti mana yang termaktub didalam AFC drawing..kalau ikut ASME opening boleh macam2 bentuk la..depend on design..Complete je marking inspector kena check to ensure the marking done as per AFC drawing..Tolong beri perhatian semasa marking inspection before opening..kena betul2 make sure elevation,orientation & size untuk opening betul..kalau salah nangis oooo...hehhehe...Nasihat aku kalau boleh sekurang2nya check 2x la...After marking satisfied by inspector,contractor akan start cutting ikut size yang diorang marking dan juga akan wat joint preparation..Joint preparation nozzle to shell ni setakat yang aku tau la ada Set In Nozzle,Set On nozzle..ada gak type lain,tapi 2 type ni yang selalau pakai la..For ASME VIII Div.1 edge preparation kat nozzle opening xperlu wat MPT @ DPT tetapi for ASME VIII Div.2 for nozzle 3" and above kena wat...Ensure gak joint preparation as per AFC drawing ye..Selepas itu contractor akan fit up nozzle to shell..Untuk inspector punye part masa wat fit up inspection kena ensure nozzle yang contractor fit up 2 according AFC drawing..Masa fit up inspection kena ensure projection nozzle to shell curve dan juga projection to vessel centerline..seperti gambar kat bawah ni...

inspector check projection from raise face of flange to nozzle centerline...Inspector kena ensure gak flange bolt hole stradle dengan center line..maksudnye bolt hole orientation jangan deviate from centerline..kalau semuanya satisfactory then inspector initial @ sign supaya welder foreman boleh instruct welder untuk jalankan kerja2 kimpalan @ welding..banyak lak aku mengomel ari ni..biasa la dah lama x menaip..heheh...Ok,untuk fit up dish end ataupun dish head atau pun kalau untuk pressure vessel yang kecil kita panggil end cap..Dish head ada banyak type...ada flat head,semi-ellipsoidal dish head,hemispherical dish head and torispherical dish head..yang aku biasa tengok semi-ellipsodial macam gambar kat bawah ni..

Macam ni la bentuk semi-elipsodial..Macam biasa la,inspector kena ensure joint configuration as per AFC drawing..kena check,root gap,bevel preparation,cleanliness and lain2 sebelum initial & sign...semoga bermanfaat untuk semua inspector diluar sana..ada kelapangan aku sambung lagi..sekarang kat tempat aku sedang wat preparation untuk ASME renewal..renewal ni setiap 3 tahun sekali..aku salah seorang yang terlibat..very interesting about this ASME renewal..1st time aku involve ni..kena wat yang terbaik la..may b aku akan brief sedikit la nanti..ok la..wa chow dulu..

Salam sejahtera.
Hi Tech Singapore memerlukan 4 orang Plant Inspector.

Requirement:
1)Diploma/Degree (any dicipline)
2)cert API510/API570
3)2 years exp. as Plant Inspector

Lain-lain info :
-projek di Jurong Island
-permanent staff

Anda boleh hantar CV pada Khairuddin Yusffob(khairuddin84@yahoo.com)

NOTE:THIS JOB WAS EXTRACT FROM melayu_ndt group

Painting Inspector

Immediate vacancy available for a Painting Inspector

Company Name: Velosi (M) Sdn Bhd
Location: Miri, Sarawak
No of positions required: 7 positions

Minimum requirement:
MCE/ SPM/ GCE 'O" Level or equivalent
Certified Plant Inspector with valid NACE/ IMM Level II/ BGAS CSWIP in Painting Inspector
With at least 3 years experience in relevant position
This post requires you to be stationed at Miri, Sarawak

Interested candidates to email your complete resume together with your certificates to aliza@velosi.com

*Only shortlisted candidate will be notified

QA/QC Inspector (Structural / Mechanical / Electrical)

dvertised: 27-03-11 | Closing Date: 26-04-11.


We area globally recognized company dealing with the supply of port and hydro equipment to customers located all over the world. In line with our expansion plan, we are inviting suitably qualified candidates to fill the following position:

Responsibilities:
QA/QC Inspector (Structural / Mechanical)

* Carry out inspection at respective stages of fabrication and erection.
* Assist in preparation of Inspection Test Plan. (ITP)
* Familiarize the client and project specification.
* Carry out QC inspection such as material receiving, marking & layout, weld fit-up, welding inspection for before and after welding, visual inspection, final dimensional and final visual inspection.
* Verify material for compliance with specification.
* Review drawing for inspection on fabrication material.
* Update QC report and drawing provided with customer specifications, condition of supply and customers’ requirements by using appropriate Inspection Measurement Test Equipment (IMTE) or Monitoring & Measuring Devices (MMD).

QA/QC Inspector (Electrical)

* Conversant with QA / QC documentation, electrical specification and installation to commissioning procedures.
* Inspection and testing all electrical equipment in accordance to standard procedures i.e. ANSI (American National Standard Institute), NEC (National Electrical Code) and MS (Malaysian Standards)
* Perform routine inspection and document result in accordance with approved Project procedures and specification.
* Monitor electrical & instruments activities, quality, testing, documentation, pre-commissioning, commissioning and start up.
* Takes leadership in assuring that electrical activities are performed safely and in accordance with safety policies.
* Carry out site installation and site acceptance test by means if a quality controlled hand over system to the client.
* Monitor installation of cable, cable tray, lighting, distribution control panel, grounding system and all related to the electrical fixing within the project specification.
* To witness continuity test, motor insulation test, cable insulation test, component test for High/Low voltage equipment and Hi-Pot test whereby you should be able to verify and deliver all electrical test results promptly.
* To follow up with pre-commissioning, final commissioning and preparation of relevant electrical inspection.
* Witness cable termination for medium and low voltage power to switch gear, MCC, MV /LV electrical motor.
* Issuance of inspection request to client for prior approval.
* Offer advice to contractor/electrical department in the installation as per Electrical drawing and diagram.
* To be decisive on the acceptance and rejection of all electrical inspection.
* Making punch list and provide corrective actions to be performed.
* Close out changes made through NCR and queries received appropriately.
* To be responsible for identifying parts status after inspection is carried out.
* To take note of the non-conformity of inspected parts in Non-Conformance Parts Record (NCPR) and log appropriately.
* To initiate corrective action for any non-conformity identified during inspection.
* To follow-up on corrective and preventive action in case of any claim from customers.
* Constant coordination with fabrication, erection supervisors and foreman
* Provide support to fabrication, mechanical assembly, and erections operations by ensuring inspections/test and documentation results are carried out timely and efficient manner where documentation procedures are adhered to client requirements.
* Properly ensure all items leaving from IMPSA strictly meet with clients’ standard and specifications.

Requirements:

* Possess Certificate / Diploma / Degree in Structural Engineering, Mechanical or Electrical engineering discipline.
* Min. 3 years QA / QC work experience in structural, mechanical steel fabrication, electrical installation and commissioning.
* Knowledge in CSWIP 3.1 and PLC (Siemens) would be an added advantage.
* Familiar with common engineering industry codes of practice i.e. ASME, AWS, ASTM, ANSI, IEEE, NEC, MS & FEM.
* Well versed in drawing interpretation i.e. structural, mechanical, and electrical.
* Able to handle and use relevant equipment and tools accurately for inspection.
* Able to visualize and utilize relevant inspection techniques.
* Able to read engineering data specification.
* Computer literate and proficient in MS Office application
* Able to work independently as well as being a team-player with strong commitment in creating department harmony.
* Carries out task under pressure and meets the demand of the job.
* To be responsible for carrying out inspection according to the drawing provided.
* Possess own transportation.
* Good interpersonal and communication skills.
* Maintains a positive personality with an impressive prospective reach on task assigned.
* Candidate must be willing to relocate to Lumut, Perak.

"An attractive remuneration package commensurating with experience, a career development program plus technological state of the art environment will be offered to the successful candidate."
If you feel you are the right candidate to fill-up the above position, please submit your resume, with details of your experiences, a passport size photograph, copies of relevant certificates / testimonials, current and expected salary to:

Human Resources Department
IMPSA (M) SDN BHD
Lot 8-3, Jalan Besar
Kawasan Perindustrian Pelabuhan Lumut,
32000 Sitiawan, Perak
Email : susan.lee@impsa.com
kumutha.jaganathan@impsa.com

Overall outlook for O&G sector remains bright

Malaysia External Trade Development Corp (Matrade) deputy chief executive officer of trade and services promotion Dr Wong Lai Sum said contracts secured by Malaysian companies in countries like Libya will be affected by the unrest, but those with projects in other places in the Middle East are unaffected.

Domestically, she said, the outlook is favourable as projects under the Economic Transformation Programme will generate more businesses for local O&G players throughout the value chain.

"We have companies almost everywhere in the world, so our interest is diversified," Wong told a media roundtable on O&G in Kuala Lumpur yesterday.

Also present were Malaysian Oil and Gas Services Council president Sofiyan Yahya and Matrade director of oil and gas and chemical Abu Bakar Koyakutty.

Wong expects the rising global oil prices to be temporary as the North African countries affected by the uprisings are not major oil exporting nations.

"Bearing in mind that the turmoil is only in Libya, Yemen and Syria, and has not gone into Qatar or Saudi Arabia, the impact (on the global oil price) will be transitional," she said.

If the turmoil continues until year-end, Malaysia's exports will be higher with double-digit growth, she added.

Last year, Malaysia's O&G exports amounted to RM101.2 billion, up 24 per cent from 2009 - a growth attributed mainly to high oil prices. The exports grew at an annual average of 13.5 per cent in the past 10 years.

Wong said concerns over the turmoil in the region that spike global oil prices, would have positive impact on oil exporting countries. But it is otherwise on oil importers.

"Currently, Malaysia is a net oil exporter, so we gain more than we lose," she said.

The O&G sector currently contributes a fifth to the country's gross domestic product.

Matrade is organising several trade missions to new markets, to open up opportunities for over 3,000 local O&G players, including public-listed companies.

Abdul Rahman said for this year, Matrade has six missions to the United Arab Emirates, Oman and Kuwait as well as the UK, Australia, Turkmenistan, Myanmar and Kazakhstan.

These markets have multi-million dollar potential in business for local players.

"Last year, the business potential in Turkmenistan's O&G sector was worth nearly RM1 billion, while in Myanmar, it was RM22 million," he said.

Meanwhile, Sofiyan said local O&G players are of world-class standard and unlike their peers in other sectors, they do not need to upgrade their operations, processes or products in order to go global.

Similarly, Malaysian professionals and experts in the sector are highly sought after all over the world.

INSPECTOR(QUALITY)

Assalammualaikum..

To all inspector,aku ada post jawatan kosong..Boleh la sama2 mencuba..
Good Luck!!!;-)

Inspector (Quality)
(Johor)Advertised: 17-03-11 | Closing Date: 16-04-11



Responsibilities:

* Quality control, as inspector, to all products, column & cold box, during all manufacturing process.
* To follow & execute the company’s specification & relative design/manufacture codes & standards.
* To be responsible for material check, drawing interpretation, cleaning check, inspection, witness & final check to pressure vessels & pressure piping, pressure test witness, which is specified & identified as key inspection points.
* To review the check list, prepare the dossier & reports per quality plan requirement.
* To assist & coordinate the inspection activity from authority or client’s representative.
* To provide kinds of training to shop workers.

Requirements:

* Must have background of boiler, pressure vessel & machinery manufacture.
* Minimum 4 years work experience in a similar work environment in manufacture facility, with suitable inspection skills & inspection tools using skills.
* Good ability of drawing reading & understanding of boilers, pressure vessel or pressure piping, and some knowledge of relative codes & standards.
* Knowledge of NDE & welding is preferable.
* Sensitive view on quality issue & ability of problem solving is required.
* This job requires high accountability on performance.

Kalau nak apply kena masuk Jobstreet ye.=)
Tq..

Metering Skid

Assalammualaikum..

Ari ni aku nak cter pasal Metering Skid la..sebelum ni aku ada upload gambar Metering Skid tapi yang dah complete..ari ni aku cter ckit perjalanan untuk fabrication metering skid ni..Metering skid baru ni untuk project Sepat Development..Owner PCSB..Ok la,first2 sekali sebelum start any fabrication mesti la kena ada drawing,wps dan lain2 procedure..As a Inspector kita kena ensure la semua tu sudah mendapat approval dari client..after that material akan receive kat shop..material receiving untuk piping lebih kurang sama dengan receiving plate untuk pressure vessel..most material untuk skid ni piping,fitting,flange,valve and etc..lepas material dah ACCEPT baru la contractor akan marking & cutting pipe..After that diorang akan fit up mengikut drawing yang telah APPROVED dari client..Drawing piping dengan pressure vessel ataupun lain2 equipment xsama..piping ada line no,spool no,joint no,pipe support,cable tray support and etc..Kebanyakan Metering Skid akan follow Construction Code ASME B31.3 and off course plus client or owner specification macam PTS,DEP,GS and etc..Masa nak inspect fit up kena ensure material according to drawing..Pastikan semuanya under tolerances(for joint preparation) sepetimana yang tertakluk dalam Code or Specification..

gambar yang atas sekali tu adalah marking ataupun identification untuk flanges..As a inspector kena ensure rating,material,size,thickness and code construction untuk flanges(ASME B16.5)sama ngan drawing..Gambar yang satu lagi pipe spool yang dah siap fit up and sedang dalam pemeriksaan..hehe..After inspector accept baru la welder akan mengimpal joint tersebut macam gambar kat bawah ni..

Pressure Vessel(Shell Course/Can Inspection)

Assalammualaikum..

Aku baru balik dari Singapore untuk site verification..seronok gak keje kat site ni..first time aku masuk site..heheh..biasa la "youngest inspector"...hohohoh...ok la,aku nak sambung pasal fabrication pressure vessel..Selepas siap je rolling plate dan menjadi satu silinder atau dalam engineering term SHELL COURSE @ SHELL CAN, inspector kena la wat inspection terlebih dahulu sebelum proceed untuk welding longitudinal joint(LW) bagi menjadikannya SHELL..bukan company Shell tu ye...=)ape yang inspector perlu inspect on that stage adalah joint preparation,inside diameter,outer circumference,length of SHELL CAN and inside curvature of shell..pastikan semuanya mengikut drawing yang telah disahkan ataupun dalam bahasa lain "APPROVE FOR CONSTRUCTION" dan juga mengikut spesifikasi yang telah ditetapkan..untuk spesifikasi pastikan comply to client specification(eg..DEP,PTS,GP and etc..),project specification dan juga code of construction(eg..ASME VIII Div.1 or 2)

Salah seorang inspector yang bakal mengoncang dunia..hehhe..Outer circumference check perform..

Internal diameter check perform by laser range..kalau xde laser kena la pakai measuring tape...hehehhe...ha,masa ni contractor xkan la dia duduk saja plak..dia akan prepare untuk fit up nozzle gak..aku upload gambar nozzle yang dalam proses dikimpal..

Salah seorang welder mengimapal nozzle menggunakan proses GTAW(Gas Tungsten Arc Welding) ataupun TIG(Tungsten Inert GAs)..

QC at KQKS

Advertised:10-03-11 | Closing Date:09-04-11.

We are an exciting oil & gas service provider, specializing in EPCC of oil & gas terminal, plant construction & pipeline construction. Highly motivated individuals who are seeking exciting career development are invited to join us in the following fields:-

Quality Controller
(Selangor - Kayu Ara, Damansara)

Requirements:

* Qualified in CSWIP 3.1 with 5 years experience in oil & gas industry.
* Experience in tank, piping erection work in oil & gas facilities is the mandatory requirement.

Note : All key personnel must be conversant in English. Interested candidates are invited to submit their comprehensive curriculum vitae, current and expected salary together with a passport photograph to :-
Executive Director
Email to : kqks@kqks.com.my Fax : ++603-7726 9566

Petronas to build RM3 bln mega ammonia urea plant in Sipitang

KOTA KINABALU: Petronas will be investing RM3 billion to build a mega ammonia urea plant in Sipitang.

Industrial Development Minister Datuk Raymond Tan said the plant is expected to be ready by 2013 in time for the gas from the northern field (block J) of Sabah to be channel to Bintulu via Sipitang in 2013-14.

“This is their first urea plant in this region and as an anchor industry, they will need about 70-80 million scf of gas to power the plant,” he said at the Ministry of Industrial Development (MID) annual media conference 2011 at a hotel here yesterday.

He said the Sabah Oil and Gas Terminal (SOGT) in Kimanis will be getting 750 million scf of gas from the north field and it will be piped to Sipitang before it is diverted to Bintulu.

On the Kota Kinabalu Industrial Park, (KKIP) which had been established for the past 15 years with over 70 percent already developed, Raymond said the remaining 30 percent of the development will be focused on the bio-technology, wood and rubber-based industry which is contained in the Economic Transformation Programme (ETP).

“And since Sabah is the biggest producer in the oil palm industry in Malaysia with 1.4 million hectares of oil palm, producing 6.5 million tonnes of crude palm oil (CPO) and 1 million tonnes of palm kernel oil, we have 30 million tonnes of valuable palm oil biomass which is actually a waste product that had been thrown away from the mills in Sabah that are operated by some 127 operators now,” he said.

But what have come about in the new area of development is that those waste that were discarded are valuable today, because from the biomass we can produce fertilizers, another line of downstream activity, he said.

He said there are now five to six players that have set up their plants to produce fertilizers at the POIC Lahad Datu.

And the challenge now is how much biomass or the empty fruit bunch that we can get to supply to the plants and POIC Lahad Datu has taken the initiative to buy the waste product to keep it as stock so as to encourage the downstream activity.

Overall, he said the challenges confronting the economy in 2010 are expected to persist through 2011.

He noted that the declining investment in the manufacturing sector in Sabah could be due to several factors, one of them being the dampened world economic growth and trade. Another is the increasing competition from the new emerging regional economies such as Vietnam.

A survey by UNCTAD’s World Investment Prospects indicates renewed business optimism and stronger appetite of investors to pursue expansion in 2011 and 2012. Given the scenario, global FDI inflows into our country are expected to further increase in 2011 and beyond.

To position Sabah as a desired destination for investment, Raymond said his ministry will continue with its efforts to attract investors in targeted industries such as downstream processing of palm oil, processing of oil palm/palm oil biomass and in the medium term, the processing of oil and gas as well as the service sector.

The task ahead is very challenging, and therefore the coordinated effort of all ministries, departments and the agencies in Sabah is necessary if Sabah is to maintain its competitiveness and to continue to receive high levels of foreign and domestic investment, he said.

RG Gas To Invest RM3 Billion To Build Oil&Gas Hub

KUALA LUMPUR, March 8 (Bernama) -- RG Gas and Chemicals (M) Sdn Bhd will invest RM3 billion in the next ten years to build an integrated oil and gas hub on Pulau Daat, Labuan.

Its group project director, Jimmy Y.M. Tang, said the hub, which would provide land-based logistics and support services, would be built in four phases.

"The earthworks of the first phase project will be completed by year-end. We expect the first phase to commence operations by end-2012 or early 2013," he told reporters after the Fourth Economic Transformation Project (ETP) Update here Tuesday.

The hub is one of the nine new Entry Point Projects of the ETP announced by Prime Minister Datuk Seri Najib Tun Razak here.

Tang said the first phase, with an investment of RM500 million, would involve the building of a storage tank terminal with a capacity of 300,000 cubic metres.

"The other three phases include building a 1.5 million cu metres storage tank terminal, engineering fabrication yard and other facilities including water storage facilities," he said.

Tang said the hub would likely benefit from the opening of new oil fields around the area.

"Besides that, the location is also strategically located nearer to South Korea and China, which could be potential customers," he said.

CHIYODA VACANCIES

Advertised: 08-03-11 | Closing Date: 07-04-11.


Chiyoda Malaysia Sdn. Bhd., a well-established turnkey contractor since 1974, majoring in the Engineering, Design, Procurement, Construction and Commissioning for oil, gas and petrochemical industries are inviting capable, dynamic and enthusiastic talented individuals particularly Malaysian to join us for the following positions:

QC Inspector
(Tank Work and Steel Structure Work)
(Kuala Lumpur)

Requirements:

* Posses Diploma/relevant certificates as QC Inspector
* Minimum 8 years of experience as Quality Control Inspector;
* Familiar with tank erection work, inspection requirement for Storage Tank Fabrication and Construction and Steel Structure fabrication/erection work;
* Well versed with NDE Inspection and Welding Inspection
* Experience in Oil & Gas Industry will be an added advantages;
* Familiar with QA/QC documentation requirement, inspection test plan, testing requirements etc.

QC Inspector/Supervisor (Civil)
(Kuala Lumpur)

Requirements:

* Possess diploma/ degree in Civil/Building or equivalent;
* Minimum 8 years working experience in QC Inspection work for Civil and Infra Work;
* Knowledge in detailed design work for Civil and Structural is an added advantage;
* Well versed with BS Code, ASTM, MS Code and JKR Standard;
* Have experience in construction quality control, QA/QC documentation requirement and inspection test plan.

Tank Supervisor
(Kuala Lumpur)

Requirements:

* Possess diploma/degree in Engineering or its equivalent;
* Familiar with tank fabrication and erection work;
* Minimum 6 years of experience as Tank Supervisor in Oil & Gas Industry;
* Able to lead Subcontractor in executing construction Tank Work in accordance to quality and work schedule requirement;
* Having good in work planning, control and supervision work.

PIPING SUPERVISOR

* Well versed in ANSI, ASME, API & NACE Codes related to piping;
* Experience to Piping Plant construction activities;
* Familiar with piping components and development of material specification;
* Able to perform layout design and prepare GA, Isometric & Pipe support drawings;
* Knowledge of PDS 3D will be a strong advantage;
* Understand test package document such as ASME, Test Block Diagram, ISO drawing, Calibration Record for Pressure Gauge;
* At least two years experience of piping pressure test inspection.

HVAC SUPERVISOR/INSPECTOR

* Diploma in Mechanical/Civil or Electrical Engineering or equivalent;
* Minimum 5 years working experience in installation and construction of HVAC facilities and plumbing;
* Knowledgeable in Civil and Structural works is an added advantage;
* Well versed with ASHRAE, UBBL and MS;
* Adequate exposure to quality control and HSE requirement;
* Good planning and supervising skills and a team player.

ELECTRICAL SUPERVISOR

* Minimum 6 years of working experience in construction supervision work;
* Computer literate and able to communicate in English;
* Experience in building electrical and power supply work;
* Have experience in construction quality control and HSE requirement.

QC PIPING LEAD

* Possess degree in Piping or equivalent;
* 5 years direct experience in QA/QC inspection work;
* Minimum 8 years working experience in construction supervision work;
* Able to manage, organize and oversee the daily work at site;
* Good written skills and communicate well in English;
* Strong coordination skills for interfacing work with other work discipline;
* Good planning and management skills.

CIVIL STEEL INSPECTOR/SUPERVISOR

* 6 years relevant experience in inspection and construction quality control
* Valid CSWIP 3.1 Welding Inspector Certificate or AWS Certified;
* Good knowledge on quality, painting inspection, testing and HSE requirements;
* Good planning and management skills and a team player;
* Conversant with standard computer application.


Interested candidates are encouraged to apply on-line(chiyoda@chiyoda.com.my). Alternatively, you may email or send your resume, detailing your qualifications, post applied, current and expected salaries, with a recent passport-sized Photograph (NR) to the attention of:

The Administration Department,
Chiyoda Malaysia Sdn. Bhd.,
15th Floor, Menara Maxisegar,
Jalan Pandan Indah 4/2, Pandan Indah,
55100 Kuala Lumpur.
Fax No: 03-42970800
E-Mail: chiyoda@chiyoda.com.my