QA/QC Inspector (Structural / Mechanical / Electrical)

dvertised: 27-03-11 | Closing Date: 26-04-11.


We area globally recognized company dealing with the supply of port and hydro equipment to customers located all over the world. In line with our expansion plan, we are inviting suitably qualified candidates to fill the following position:

Responsibilities:
QA/QC Inspector (Structural / Mechanical)

* Carry out inspection at respective stages of fabrication and erection.
* Assist in preparation of Inspection Test Plan. (ITP)
* Familiarize the client and project specification.
* Carry out QC inspection such as material receiving, marking & layout, weld fit-up, welding inspection for before and after welding, visual inspection, final dimensional and final visual inspection.
* Verify material for compliance with specification.
* Review drawing for inspection on fabrication material.
* Update QC report and drawing provided with customer specifications, condition of supply and customers’ requirements by using appropriate Inspection Measurement Test Equipment (IMTE) or Monitoring & Measuring Devices (MMD).

QA/QC Inspector (Electrical)

* Conversant with QA / QC documentation, electrical specification and installation to commissioning procedures.
* Inspection and testing all electrical equipment in accordance to standard procedures i.e. ANSI (American National Standard Institute), NEC (National Electrical Code) and MS (Malaysian Standards)
* Perform routine inspection and document result in accordance with approved Project procedures and specification.
* Monitor electrical & instruments activities, quality, testing, documentation, pre-commissioning, commissioning and start up.
* Takes leadership in assuring that electrical activities are performed safely and in accordance with safety policies.
* Carry out site installation and site acceptance test by means if a quality controlled hand over system to the client.
* Monitor installation of cable, cable tray, lighting, distribution control panel, grounding system and all related to the electrical fixing within the project specification.
* To witness continuity test, motor insulation test, cable insulation test, component test for High/Low voltage equipment and Hi-Pot test whereby you should be able to verify and deliver all electrical test results promptly.
* To follow up with pre-commissioning, final commissioning and preparation of relevant electrical inspection.
* Witness cable termination for medium and low voltage power to switch gear, MCC, MV /LV electrical motor.
* Issuance of inspection request to client for prior approval.
* Offer advice to contractor/electrical department in the installation as per Electrical drawing and diagram.
* To be decisive on the acceptance and rejection of all electrical inspection.
* Making punch list and provide corrective actions to be performed.
* Close out changes made through NCR and queries received appropriately.
* To be responsible for identifying parts status after inspection is carried out.
* To take note of the non-conformity of inspected parts in Non-Conformance Parts Record (NCPR) and log appropriately.
* To initiate corrective action for any non-conformity identified during inspection.
* To follow-up on corrective and preventive action in case of any claim from customers.
* Constant coordination with fabrication, erection supervisors and foreman
* Provide support to fabrication, mechanical assembly, and erections operations by ensuring inspections/test and documentation results are carried out timely and efficient manner where documentation procedures are adhered to client requirements.
* Properly ensure all items leaving from IMPSA strictly meet with clients’ standard and specifications.

Requirements:

* Possess Certificate / Diploma / Degree in Structural Engineering, Mechanical or Electrical engineering discipline.
* Min. 3 years QA / QC work experience in structural, mechanical steel fabrication, electrical installation and commissioning.
* Knowledge in CSWIP 3.1 and PLC (Siemens) would be an added advantage.
* Familiar with common engineering industry codes of practice i.e. ASME, AWS, ASTM, ANSI, IEEE, NEC, MS & FEM.
* Well versed in drawing interpretation i.e. structural, mechanical, and electrical.
* Able to handle and use relevant equipment and tools accurately for inspection.
* Able to visualize and utilize relevant inspection techniques.
* Able to read engineering data specification.
* Computer literate and proficient in MS Office application
* Able to work independently as well as being a team-player with strong commitment in creating department harmony.
* Carries out task under pressure and meets the demand of the job.
* To be responsible for carrying out inspection according to the drawing provided.
* Possess own transportation.
* Good interpersonal and communication skills.
* Maintains a positive personality with an impressive prospective reach on task assigned.
* Candidate must be willing to relocate to Lumut, Perak.

"An attractive remuneration package commensurating with experience, a career development program plus technological state of the art environment will be offered to the successful candidate."
If you feel you are the right candidate to fill-up the above position, please submit your resume, with details of your experiences, a passport size photograph, copies of relevant certificates / testimonials, current and expected salary to:

Human Resources Department
IMPSA (M) SDN BHD
Lot 8-3, Jalan Besar
Kawasan Perindustrian Pelabuhan Lumut,
32000 Sitiawan, Perak
Email : susan.lee@impsa.com
kumutha.jaganathan@impsa.com